Showing all 28 results

Vassar Manufacturing of Perkins Oklahoma. Makers of agricultural farm equipment.

– Moldboard is 3/16″ formed steel
– 3/16″ end plates.
– Scarifier shankxa0 3/4″ X 2″ high carbon steel.
– Cutting edges 9/32″ X 4″ high carbon steel
– 517 lbs
$893.00
– Moldboard is 3/16″ formed steel
– 3/16″ end plates.
– Scarifier shankxa0 3/4″ X 2″ high carbon steel.
– Cutting edges 9/32″ X 4″ high carbon steel
– 517 lbs
$793.00
– Scarifier shankxa0 3/4″ X 2″ high carbon steel.
– Approximate Capacity:15 CU.FT.
– No. Shank: 6 Each
– Main beam is 3″ Square Tubing.
– Moldboard is 3/16″ formed steel

– Cutting edgesxa0 9/32″ X 4″ high carbon steel
– 440 lbs

$753.00
– 3/8″ steel construction.
– 40″ opening.
– Includes twin 2×6 cylinders
– 40u201d opening for load capacity
– 600 lbs
$2,734.00
Recommended for 35 to 40 HP machines
– 3/8″ steel construction.
– 40″ opening.
– Includes twin 2×6 cylinders
– 40u201d opening for load capacity
– 530 lbs
$2,653.00

– Main Shanks: 1″ to 5″ Steel;
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings: 60″
– Cylinders: 2″ x 8″ Stroke
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing
Mounting Bracket also needed at additional cost

xa0

$3,643.00

– Main Shanks: 1″ to 5″ Steel;
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings: 60″
– Cylinders: 2″ x 8″ Stroke
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing
Mounting Bracket also needed at additional cost

$3,293.00

– Main Shanks: 1″ to 5″ Steel;
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings: 60″
– Cylinders: 2″ x 8″ Stroke
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing
– Mounting Bracket also needed at additional cost

$2,843.00

– Main Shanks: 1″ to 5″ Steel;
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings: 60″
– Cylinders: 2″ x 8″ Stroke
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing
Tractor Mounting Bracket Required*(not included)

xa0

$2,473.00

– Main Shanks: 1″ to 5″ Steel;
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings: 60″
– Cylinders: 2″ x 8″ Stroke
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing

xa0

$3,943.00

– Main Shanks: 1″ to 5″ Steel;
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings: 60″
– Cylinders: 2″ x 8″ Stroke
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing

$3,593.00

– Main Shanks: 1″ to 5″ Steel
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings 60u201d (5u2019)
– Cylinders: 2″ x 8″ Stroke
– Protected Cylinders
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing

$3,143.00

– Main Shanks: 1″ to 5″ Steel;
– Removable and Replaceable
– Closing Shanks: 3/4″ to 4″ Steel
– Shank openings 60u201d (5u2019)
– Cylinders 2u201d x 8u201d stroke 5u2019 & 6u2019 Models
– Protected Cylinders
– Hinge Bushings are replaceable
– Main Frame: 3″ x 3″ Sq. Tubing
– SS Comes complete ready to use.
xa0

$2,993.00

– Recommended for 30 to 40 HP machines
– 3/8″ steel construction
– 40″ opening
– Includes twin 2×6 cylinders
– Mounting Bracket needed at additional cost
– 489 lbs
$2,273.00
Recommended for 60 to 50 HP machines
– 3/8″ steel construction
– 40″ opening
– Uses twin 2×6 cylinders
– 456 lbs
$2,073.00
Recommended for 40 to 50 HP machines
– 3/8″ steel construction.
– 40″ opening.
– Uses twin 2×6 cylinders
– 567 lbs
$2,603.00
Recommended for 35 to 40 HP machines
– 3/8″ steel construction.
– 40″ opening.
– Includes twin 2×6 cylinders
– 536 lbs
$2,383.00
– For Category 1 Hitches
– SE2 48 Solid Rear BLD
– Approximate Capacity:15 CU.FT.
– No. Shank: 6 Each
– Main beam is 3″ Square Tubing.
– Moldboard is 3/16″ formed steel
– 3/16″ end plates.
– 380 lbs
$583.00
– Approximate Capacity:13 CU.FT.
– No. Shank: 5 Each
– Main beam is 3″ Square Tubing.
– Moldboard is 3/16″ formed steel
– 3/16″ end formed steel plates.
– Scarifier shank of 3/4″ X 2″ high carbon steel.
– Cutting edges 9/32″ X 4″ high carbon steel
– 343 lbs
$633.00
– For Category 1 Hitches
– Approximate Capacity:12 CU.FT.
– No. Shank: 5 Each
– Main beam is 3″ Square Tubing.
– Moldboard 3/16″ formed steel
– 3/16″ end plates.
– Scarifier shank 3/4″ X 2″ high carbon steel.
– Cutting edges 9/32″ X 4″ high carbon steel
– 306 lbs
$493.00
– HANDEE II Box Blade w/4sh
– For Category 0 Hitches
– Approximate Capacity:10 CU.FT.
– No. Shank: 4 Each
– Main beam is 3″ Square Tubing.
– Moldboard 3/16″ formed steel & 3/16″ end plates.
– Scarifier shank 3/4″ X 2″ high carbon steel.
– Cutting edges 9/32″ X 4″ high carbon steel
– 267 lbs
$493.00

– 3/8″ Steel Plate Main Frame
– 1″ x 12″ Blades
– Blade Carriers: 2.25″ x 6″ Steel
– 5″ Dia x 8″ Stroke Cylinder
– 2″ Dia. Cyl Rods
– Max 16″ Dia. Shear Capacity

$8,273.00
– 3/8″ Steel Plate Main Frame
– 1/2″ x 6″ Blades
– Blade Carriers: 1″ x 6″ Steel
– 3″ Dia x 6″ Stroke Cylinder
– 1.5″ Dia. Cyl Rods
– Max 7″ Dia. Shear Capacity
– 700 lbs

– 3/8″ Steel Plate Main Frame
– 1″ x 10″ Blades
– Blade Carriers: 2.25″ x 6″ Steel
– 5″ Dia x 8″ Stroke Cylinder
– 2″ Dia. Cyl Rods
– Max 12″ Dia. Shear Capacity
– 1500 lbs

$6,373.00

– 3/8″ Steel Plate Main Frame
– 3/4″ x 8″ Blades
– Blade Carriers: 2.25″ x 4″ Steel
– 4″ Dia x 6″ Stroke Cylinder
– 2″ Dia. Cyl Rods
– Max 10″ Dia. Shear Capacity

$5,413.00

– 12″ Dia. Shear Capacity
– for Tractors 65 hp and over with one Remote In/Out
– 3/8″ Steel Plate Main Frame
– 3/4″ x 10″ Blades
– Carriers: 2.25″ x 6″ Steel
– 5″ Dia x 8″ Stroke Cylinder
– 2″ Dia. Cyl Rods
– 1520 lbs

$6,093.00

– 10″ Dia. Shear Capacity
– for 45-75 hp Tractors with one Remote In/Out
– 3/8″ Steel Plate Main Frame
– 3/4″ x 8″ Blades
– Carriers: 2.25″ x 4″ Steel
– 4″ Dia x 6″ Stroke Cylinder; 2″ Dia. Cyl Rods

,


02/15/14

$5,143.00
– 7″ Dia. Shear Capacity
– for 40-55 hp Tractors with one Remote In/Out
– 1/4″ Steel Plate Main Frame
– 1/2″ x 6″ Blades; Carriers: 1″ x 6″ Steel
– 3″ Dia x 6″ Stroke Cylinder
– 1.5″ Dia. Cyl Rods
– 700 llbs

Tractor Mounted (TM) Tree Shear requires Mounting Bracket Attachment
* Mounting Bracket must be added to price.

,

02/15/14