McLaughlin Drilling & Boring
|
Low maintenance trenchless construction equipment solutions for the power, gas, telecom, water, sewer and oil industries.
McLaughlin offers a full line of Hole Hammer pneumatic piercing tools, Mighty Moles, Pit Launch directional drills, Auger boring machines, On-Target steerable auger boring systems, and cradle boring machine for trenchless installation of steel casing, conduit, cable and hdpe pipes.
Sale!
– Pit Boring Machine runs off skid steer, mini-ex or backhoe
– Telescoping side stabilizers, Simple operator controls.
– Boring speeds up to 5’ (1.524 m) per minute.
– Bores diameters up to 3 ½” and distances 50′ to 80’
– Bore Reams: 1 1/4” – 2 1/2”; 2” – 4 1/2”
– For Pits: 78″ long by 18″ to 24″ wide
– Telescoping side stabilizers, Simple operator controls.
– Boring speeds up to 5’ (1.524 m) per minute.
– Bores diameters up to 3 ½” and distances 50′ to 80’
– Bore Reams: 1 1/4” – 2 1/2”; 2” – 4 1/2”
– For Pits: 78″ long by 18″ to 24″ wide
– M451010SS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″, 115 lbs.
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″, 115 lbs.
– M451010SS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″, 115 lbs.
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″, 115 lbs.
– M451010MS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″, 115 lbs.
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″, 115 lbs.