Lower prices than even buying direct. If not we want to know.
Cantherm-EC-series
In-Stock

Cantherm EC-Series Indirect Fired Portable Heaters or 2023-2024

Flat Rate Shipping (for immediate purchases) : $ 0
Use Quick Quote in the tab below for precise shipping.

100K, 200K, 300K BTU Models. The Cantherm EC Series of diesel indirect-fired portable heaters are the go-to heater for convenience and high heat output. Italian-made heaters distributed out of Winnepeg Canada ot the Canadian and North American markets. A full line of accessories — ducts, splitters, thermostats, remote fuel connectors are available. For larger models see the Cantherm PHOEN SERIES indirect-fired 400K BTU with two fans..

For a quotation use the QUICK QUOTE form in the tab below, or call us at 800-214-1649.
SKU: CAN-EC-SERIES Categories: , , , , ,

Cantherm EC-Series Indirect Fired Oil Heaters and Accessories

  • EC Series Heaters:
    – Four loop heat exchanger, provides more efficiency
    – Built-in oil burner
    – Electronic flame control
    – Safety overheat thermostat and pressure switch
    – Double skinned combustion chamber
    – Pre-heated Oil filter (except EC100)
    – Two stage startup for cold starts
    – Pre-purge and post-ventilation cycles
    – Twist-lock tank cap with leash
    – Stainless steel heat exchanger
    – Pneumatic tires
    – Fuel Tank
    – Internal Thermostat
    – Fuel: Burns Diesel, Kerosene, Fuel Oil, JP-8, Jet A Fuel

MODELS AND SPECIFICATIONS

EC 100 Heater
– Heat Output: 113,000 BTU
– Air Flow: 880 CFM; Heat Rise 150 deg. F.
– Heat Output: 113,000 BTU
– Air Flow: 880 CFM; Heat Rise 150 deg. F.
– .81 GPH; 11.9 Gallon Tank; 110 V
– Pneumatic Tires, Fuel Gauge,
– Preheated fuel filter std.
– Uses 12″ x 12′ Pin-Lock Duct;
– No adapter needed
– Tank Capacity: 11.9 US Gallons
– Fuel Consumption: .81 Gallons/hour
– Size: 47″L x 18″W x 27″H
– Weight: 94 lbs

EC 200 Heater
– BTU: 219,000
– Field Consumption (GPH): 1.56
– CFM: 1530
– Duct Length (ft.): 50
– Dimensions (LxWxH in.): 47x20x37
– Weight: 176 lbs
– Duct Diameter (in.): 12
– Tank (gal.): 17.2
– Power Supply: 110V

EC 300 Heater
– BTU: 306,000
– Field Consumption (GPH): 2.18
– CFM: 2500
– Duct Length (ft.): 50
– Dimensions (LxWxH in.): 73x28x41
– Weight (lbs): 264
– Duct Diameter (in.): 16
– Tank (gal.): 27.7
– Power Supply: 110V

The EC Series is built using a proprietary four-loop exhaust system that results in higher efficiencies and heating power than the traditional three-loop system used in most heaters:

  • It comes standard with a four-loop heat-exchanger, providing a longer path for exhaust gases to release their heat before exiting through the chimney. The end result is a 2% increase in efficiency over the performance of the traditional three-loop heat-exchanger.
  • Hot gas passages between the EC Series firebox and exchanger are exposed to lower temperatures, pumping up the heater and gaining an additional 10% in heating power compared to three-loop units of the same size.
Weight N/A
Dimensions 20 × 37 in
EC Heater Model

EC100, EC200, EC300
  • Best Rates for commercial location WITHIN city limits; or a freight depot for will-call, a farm supply store, NAPA dealer, etc. You can change this later.
  • This field is for validation purposes and should be left unchanged.