Belltec M Series Hydraulic Auger Drives 2024
The M Series (Max) is a medium-duty drive in the relative Belltec line, in three models ranging from 1,339 – 3,582 ft lbs torque.
Offered as drive only, or as a Kit for skid steers.
For suspending from a backhoe or excavator, see the BH Swivels
022322
Belltec M Series Hydraulic Auger Drives 10-35gpm 3,500 psi
Planetary auger drive for moderate to heavy duty drilling conditions. Mounts available for skid steers, tractor front end loaders, backhoes and excavators. Flow ranges from 10-35 GPM and operating pressures to 3500 PSI. No Case drain hoses required. Ideal for light Construction, rental and heavy farm and ranch purposes.
Belltec M Series drives offer an economical answer to complete robust auger challenges. These will auger from dirt to solid rock and concrete. Providing enough torque is present, which these units offer, the secret to digging solid rock and concrete is down pressure. Thus, backhoes and excavators offer the most down pressure, but skid steers can dig solid rock if outfitted with weights for added downpressure.
The M Series are basically the same unit as the Belltec H Series but without the shear flange protection of the H Series. So for extreme duty applications select the H Series.
All Belltec drives are available individually or as a Kit with a skid steer mount, hoses and couplers. Here’s where to find all the Belltec Drive Mounts.
Here is the entire Belltec Drive lineup you can link to:
Belltec LC Series Auger Drives 15-35 gpm 3000psi. Economy model, for occasional or light-duty use.
Belltec M Series Auger Drives 10-35 gpm 3500psi. Same as H Series but no shear flange.
Belltec H Series Auger Drives 10-35 gpm 3500psi. Same as M Series but with Shear Flange
Belltec HTLS SeriesAuger Drives 6-30 gpm 3500psi. Extreme Duty
Belltec TM48 Auger Drives for 3-Point Tractors
| Weight | 200 lbs |
|---|---|
| Select Model: | M200 (10-20gpm), M200 with Kit, M300 (15-30gpm), M300 with Kit, M350 (20-35gpm), M350 with Kit |