Showing all 16 results

Sale!

A towable one man hole digger. The General Dig-R-Mobile tows is highway legal and includes the necessary quick attach towbar and adjustable ball coupler.
– Honda engine
– Max Driling Torque: 276 ft. lbs. at 2000 PSI
– 144 RPM, no load
– 8 GPM System flow at 2000 PSI
– Holds 5 Gallons regular gasoline.
– Quick attach
Forward and reverse auger direction.
– 440lbs

$6,095.00 $5,890.00
Sale!
– Pit Boring Machine runs off skid steer, mini-ex or backhoe
– Telescoping side stabilizers, Simple operator controls.
– Boring speeds up to 5’ (1.524 m) per minute.
– Bores diameters up to 3 ½” and distances 50′ to 80’
– Bore Reams: 1 1/4” – 2 1/2”;  2” – 4 1/2”
– For Pits: 78″ long by 18″ to 24″ wide
$5,897.00 $5,690.00
 – M451010SS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″,  115 lbs.
$5,390.00
 – M451010SS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″,  115 lbs.
$5,190.00
 – M451010MS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″,  115 lbs.
$3,990.00
Out of stock

Tanaka TEA-500 Two man Post Hole Digger
Looking to save time as well as your back? Tanaka’s two-man post hole digger provides maximum operator safety and comfort for larger digging jobs. Weighing only 37 lbs., this heavy-duty post hole digger can take up to a 12″ earth auger bit.
– 50 cc, 2.5 h.p. Tanaka two-stroke engine
– 33:1 gear reduction
– 1″ round output shaft – Dual safety throttles
– One-year commercial / rental warranty
– Auger Bits Sold Separately- This is has been discontinued.  Please look at General Equipment Hole Diggers.

$1,463.00

– Economical lightweight hydraulic drive
– For small skidsteers and light tractors
– Maximum Output Torque: 1419 ft-lbs
– Recommended Fluid Flow: 6-15 gpm
– Maximum Pressure-Continuous: 3000 psi
– Suggested Max Auger Dia-Dirt: 18 in
– Weight: 148 lbs
FREE SHIPPING to Continental USA & S. Canada when ordering with two accessories.

$1,441.76
HSDA Tree and Shrub Auger

,

2-9/16 in Round Coupler
18 in x 36 in x 54 in
BEL-A12027B
$1,236.83
– Guide Lever Included
– Heavy Duty 90 H.P. Gearbox, Power Shaft w shear pin
– Gearbox Slip Clutch Optional
– 2″ round output shafts
– Augers secured by a collar and two 1/2″ bolts
– Augers Sold Separately, in 32″ or 44″ lengths to 36″ dia.

$1,083.00

– Medium Duty Auger Hole Digger.
_ Adjustable Easy-On, Easy-Off
– Category I & II 3-Point Hitch tractors
– PTO speed not to exceed 540 RPM
– Auger sizes 6″, 9″, 12″
– Heavy duty drive shaft protected by shear pin
– Augers Sold Separately

$873.00

– Augers available in 32″ or 44″ lengths
– PTO speed not to exceed 540 RPM
– 3″ pipe crane size with 1500 lb lift capacity
– Heavy duty drive shaft protected by shear pin.
– 2″ round output shafts
– Augers Sold Separately

$759.00
Sale!
Out of stock
DISCONTINUED PRODUCT
We recommend the General Equipment One Man Hole Digger instead.
NO UNITS LEFT. Item discontinued by the manufacturer.
– 32 cc, 1.6 h.p. Double Stage Reduction
– Reduction Ratio: 41:1
– Fuel Tank Size: 30.4 Fl. Oz. (900 cc)
– S-Start system reduces pull-force required by 40 percent
– Sound Reduction System
– Auger Bits Sold Separately
$653.00 $625.00

xa0

– TANAKA TED-270PFR Gas Drill Hole Digger
– Powerful 27 cc, 1.4 h.p. PureFire engine.
– 27 cc, 1.4 h.p. PureFire two-stroke engine
– 20:1 gear reduction Powered reversing
– Includes 1/2 inch Keyless chuck
– Dual position padded front handle
– Heavy-duty fuel tank protector
– TANA-TED-270PFR
– 16lbs

xa0

$593.00

– Standard Duty 3 Pt. digger
– For Category 1 three-point
– Auger sizes available are 6″, 9″ & 12″
– PTO speed not to exceed 540 RPM
– 2-1/2″ steel pipe frame. Guide Lever Included
– 2″ round output shaft
– Augers Sold Separately

$583.00

– 32″ depth to be used with 13-25 PTO Tractor
– Standard Duty 3 Pt. digger, Category 1 three-point
– Auger sizes available are 6″, 9″ & 12″, 32″ depth
– PTO speed not to exceed 540 RPM
– 2-1/2″ steel pipe frame. Guide Lever Included
– 2″ round output shaft
– Augers sold separately

$561.00

– Light Duty: for 6″ and 9″ dia.
– EC044 digs 44″ deep
– For Category 1 three-point
– 2-1/2″ steel pipe frame. No Guide Lever
– 2″ round output shaft
– Augers Sold Separately

$453.00