Lower prices than even buying direct. If not we want to know.
Haugen_Swivel_Crane_Hook
Haugen-High-Capacity-Swivel-Hook

Forklift Swivel Hooks for Forklifts, Telehandlers & Wheel Loaders 2024

Flat Rate Shipping (for immediate purchases) : $ 140-400
Use Quick Quote in the tab below for precise shipping.

– Use Forklifts safely w a Swivel Crane Hook
– Mounts to your fork tines, standard and wide
– 24 in. load center
– 6,000 lbs, 10,000 lbs, 14,000 lbs Capacity – In Stock
– Other models one week lead time.
– One year Warranty
Also Models with Smart Hook Technology (see weights)

For a quotation use the QUICK QUOTE form in the tab below, or call us at 800-214-1649.
SKU: HAUG-MFSH Series Categories: , , Tags: , ,

Forklift Swivel Hooks for Forklifts, Telehandlers & Wheel Loaders 2024

– Start using your Forklifts safely with a Swivel Crane Hook
– Industry-standard Crosby Hook
– Mounts right to your fork tines
– 24 inch load center
– Standard Pocket Size 3.5 in. x 7.5 in.
– Available in 6,000 / 10,000 / 14,000 lbs. capacity
– Engineer Certified, Meets and/or exceeds OSHA regulations
– Meets and/or exceed OSHA regulations

Haugen Slip-on Forklift Swivel Hooks

STANDARD BASE UNITS. These units IN STOCK.
Center-to-Center of Fork Tines is 22″.
Pocket fits tines up to 3.5″ thick and 7.5″ Wide

Model Capacity Pocket Spacing Weight
MFSH-6 6,000 lbs. 14.5″ ID. – 29.5″ OD 137 lbs.
MFSH-10 10,000 lbs. 14.5″ ID. – 29.5″ OD 142 lbs.
MFSH-14 14,000 lbs. 14.5″ ID. – 29.5″ OD 147 lbs.

WIDE BASE UNITS. These units have SEVEN day lead time.
Center-to-Center of Fork Tines is 28″.
Pocket fits tines up to 3.5″ thick and 7.5″ Wide

Model Capacity Pocket Spacing Weight
MFSH-10W 10,000 lbs. 20.5″ ID. – 35.5″ OD 142 lbs.
MFSH-14W 14,000 lbs. 20.5″ ID. – 35.5″ OD 147 lbs.

High Capacity Forklift Swivel Hook for Large Forklifts and Wheel Loaders

Model Capacity Pocket Spacing Weight
MFSH-22 22,000 lbs. 26.5″ ID. – 45.5″ OD 380 lbs.
MFSH-30 30,000 lbs. 26.5″ ID. – 45.5″ OD 395 lbs.

The rating of the Haugen Swivel Hook does not reflect the rating of the forklift or telehandler. The total load must never exceed the rating of the forklift or telehandler.

Certified Engineering

Haugen Swivel Hooks have been designed and built to comply with the ANSI/TISDF B56.6-2011 and the CSA B335 safety standards. The Swivel Jibs have been tested and certified by a third party Certified Professional Engineer. A copy of their report is at the back of the owners manual, and a full engineering report is available upon request.

Installation

The Haugen Swivel Hook is very easily installed by inserting your forklift tines fully into the pockets so the ears extend behind the forks. Next, install the safety retainer pin behind the fork and insert the security clip. A diagram is included in the supplied manual. The safety retainer pins are chained to the Jib to prevent loss of the pins. These must be properly installed and secured before using the Jib. Swivel Hook frame, hook and retainer pins should be fully inspected before every use. Optional safety chains when used are only to be used in addition to the safety retainer pins, not in lieu of.

For more information refer to the manual for each model.

Haugen Swivel Hook Manuals
Swivel Hook Manual 6K Hook
 Swivel Hook Manual 10K Hook
Swivel Hook Manual – 14K Hook

081224

Weight 140-400 lbs
Capacity and Frame

6,000 lb Swivel Hook, 10,000 lb Swivel Hook, 14,000 lb Swivel Hook, 10,000 lb Wide Frame Swivel Hook, 14,000 lb Wide Frame Swivel Hook, 22,000 lb. High Capacity Swivel Hook, 30,000 lb. High Capacity Swivel Hook
  • This field is for validation purposes and should be left unchanged.
  • Best Rates for commercial location WITHIN city limits; or a freight depot for will-call, a farm supply store, NAPA dealer, etc. You can change this later.
  • Please let us know you are not a BOT. Please complete this phrase: "Twinkle twinkle little ____"