Showing all 11 results

Heaters for Every Job Large or Small!

construction-site-heaters.gif

 

Sale!
– 30,700 BTU/HR – Electric Heater
– A 240V unit requires 40Amp circuit, runs on 25A
Plug into a dryer or stove outlet
– 9kW / 240V – 30,700 Btu/Hr
– Cord: 10 ft / Plug type: NEMA 14-50P
– UL Approved, 39 lbs.
$827.00 $635.00

– Cantherm EC 100 Heater
– Air Flow: 880 CFM; Heat Rise 150 deg. F.
– .81 GPH; 11.9 Gallon Tank; 110 V
– Preheated fuel filter standard.
– Uses 12″ x 12′ Pin-Lock Duct, No adapter needed
10% OFF Order Two or More Units Coupon code EC10%Off

$1,599.00
Sale!

– Electric Motor: 1/4HP, 115 VAC, 60 HZ
– Variable up to 500 CFM (14.2 CMM) flow rates
– 1st Stage Standard: 18 x 18 x 1 inch pleated media, 30%
– 1st Stage Optional: 18 x 18 x 1 inch activated carbon
– 2nd Stage: 18 x 18 x 2.5 in. pleated HEPA, 99.7% @ 0.3 microns
– Accessory Power: Integral, 15 Amp GFCI duplex/12 Amp breaker

$795.00 $745.00

– Heat Output: 219,000 BTU
– 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
– Pneumatic Tires, Fuel Gauge, Preheated fuel filter
– 11.4 amp Draw, 175 deg. F heat rise, Weight: 176 lbs
– Optional: thermostat, external tank, lift kit

$2,189.00
Sale!

Stock subject to change without notice.
Please inquire before ordering. Thank you.

– Operates on propane or natural gas
– 335,000 BTU, 2,600 CFM
– Operates as a fresh air circulator
– 115V/60Hz/1ph/15amp
– 20ft Cord,  heavy duty casters
– Weight: 347 lbs

$3,308.00 $3,190.00
Sale!

– BTU: 294,000   CFM: 2,530 120v/15amp
– Pneumatic Tires, Fuel Gauge, Preheated fuel filter
– Tank: 27.7 gal.  2.17 gl/hr; 13 hrs
– Optional: thermostat, external tank, lift kit
– Uses 12″ Duct

 

 

$2,729.00 $2,590.00
  • AF500-0010  primary Filter
  • AF500-0020 HEPA Filter
  • AF500-0030 Odor Filter
$19.95$99.00
Sale!

Stock subject to change without notice.
Please inquire before ordering.
– 85,000 BTU; 450 CFM
– Propane or Natural Gas; Thermostatically controlled
– 115V/60Hz/1PH/15Amp; Direct Spark Ignition Control
– Operates as a fresh air circulator
– 30″ Long x 16″ Wide x 22″ High;  135 lbs

$1,273.00 $1,190.00
Sale!
Out of stock

– Two Flagro FVO-400 Indirect-Fired Heaters 790M BTU
– Air Flow: 6000 CFM from 1.5HP Fan Motor @ 3450 RPM
– DOT  Dual axle trailer w/brakes; 16’L; 7′-4″W; 6’H;  4000 lbs empty
– 14mHp 120V Stamford Newage Genset 8KW@1800rpm
– Tank Capacity: 299 US Gallons; 51 Hour Operating Time
– Built in Duct Storage- Instrument panel, keyed ignition and hour meter
 SORRY, Out of Stock

$39,134.00 $38,400.00
Sale!

Stock subject to change without notice.
Please inquire before ordering. Thank you.

– 200,000 BTU; CFM 2,500; 120 Volt, 15 Amp
– Heat Exchanger: 16 Gauge 304 stainless steel
– Fan Motor: 1/2 HP@1725 RPM; 1500 CFM
– Gas Pressure: Nat Gas 3.5″ W.C.
– Air outlet: one, 12″ Diameter
– Wheels: 2- 12″ pneumatic, 2-6″ swivel
– 53.5″ L x 27″ W x 39.5″; 280 lbs

$4,246.00 $3,790.00
Sale!

– Heat Exchanger for external exhaust
– Thermostatically controlled
– Direct spark ignition
– 2500 CFM; 390,000 BTU/hr; 450 lbs
– Built-in fuel tank for oil, diesel, or kerosene.
– More than one? Use Get Quote Button

$5,419.00 $4,990.00