Cantherm EC-Series Indirect Fired Portable Heaters or 2024-2025

Cantherm EC-Series Indirect Fired Oil Heaters and Accessories

• EC Series Heaters:
  – Four loop heat exchanger, provides more efficiency
  – Built-in oil burner
  – Electronic flame control
  – Safety overheat thermostat and pressure switch
  – Double skinned combustion chamber
  – Pre-heated Oil filter (except EC100)
  – Two stage startup for cold starts
  – Pre-purge and post-ventilation cycles
  – Twist-lock tank cap with leash
  – Stainless steel heat exchanger
  – Pneumatic tires
  – Fuel Tank
  – Internal Thermostat
  – Fuel: Burns Diesel, Kerosene, Fuel Oil, JP-8, Jet A Fuel

MODELS AND SPECIFICATIONS

EC 200 Heater
– BTU: 219,000
– Field Consumption (GPH): 1.56
– CFM: 1530
– Duct Length (ft.): 50
– Dimensions (LxWxH in.): 47x20x37
– Weight: 176 lbs
– Duct Diameter (in.): 12
– Tank (gal.): 17.2
– Power Supply: 110V

EC 300 Heater
– BTU: 306,000
– Field Consumption (GPH): 2.18
– CFM: 2500
– Duct Length (ft.): 50
– Dimensions (LxWxH in.): 73x28x41
– Weight (lbs): 264
– Duct Diameter (in.): 16
– Tank (gal.): 27.7
– Power Supply: 110V

The EC Series is built using a proprietary four-loop exhaust system that results in higher efficiencies and heating power than the traditional three-loop system used in most heaters:

• It comes standard with a four-loop heat-exchanger, providing a longer path for exhaust gases to release their heat before exiting through the chimney. The end result is a 2% increase in efficiency over the performance of the traditional three-loop heat-exchanger.
• Hot gas passages between the EC Series firebox and exchanger are exposed to lower temperatures, pumping up the heater and gaining an additional 10% in heating power compared to three-loop units of the same size.