Lower prices than even buying direct. If not we want to know.
General-SG24-Surface-Grinder

Dual Head Surface Grinder or Floor Grinder SG24

Flat Rate Shipping (for immediate purchases) : $ 160
Use Quick Quote in the tab below for precise shipping.
– Honda 11 HP gasoline engine, with oil alert
– Dual element air cleaner and conversion for use with Propane.
– Complete with 20 lbs. industrial type Propane tank, hose, coupler and accessory kit.
– Or choose the Electric Model
– Choice of Standard wedge disc plates or Magnetic
For a quotation use the QUICK QUOTE form in the tab below, or call us at 800-214-1649.
SKU: GEN-SG24/GH Category:

Dual Head Floor or Surface Grinder 11 HP GEN-SG24

General’s dual head surface grinder grinds, scarifies and cleans concrete, asphalt and a wide variety of floor coverings. This floor grinder features attachment systems designed for breaking up deposits of grease, dirt, rubber carpet backing and industrial residues. Also for cleaning concrete, asphalt and tiles, producing exposed aggregate slabs. You also can polish more delicate terrazzo and marble floor surfaces.

Units feature standard twin, counter-rotating discs that can work a 24″x12″ area. So, they can be quickly removed to allow attaching standard 10″ diameter, multi-segmented dry diamond discs for increased productivity on polymer concrete, epoxy, plastic overlays and critical flat floor installations.

The SG24GH gas model floor grinder is powered by an 11 hp Honda engine with LP gas conversion available.

The 2 hp motor incorporates a manual voltage selection switch to accommodate available jobsite power. The 3 hp motor provides additional power for the most demanding applications. Both motors feature dual starting capacitors and thermal overload protection switches for safety and security.

– Honda 11 HP gasoline engine
– Oil alert
– Dual element air cleaner and conversion for use with Propane.
– Complete with 20 lbs. industrial type Propane tank, hose, coupler and accessory kit.

SG24E LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER or floor grinder

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights; 3 inch diameter dust collection attachment port. Includes safety and dust shield assembly kit.

Specifications:
POWER SOURCE
Type: Lesson, single phase, 115/230 VAC, 60 Hz
RPM: 3450
Horse Power: 2HP (1492w)

FRAME
Structure: Unitized, welded steel plate
Bearings: High capacity, Zerk® type fittings
Drive System: Dual B Series, V-belt/pully and spur gear reduction
Multi-Accessory Disc: Two each, aluminum, counter- rotating
Disc Rotation Speed: 250 RPM

General
Width: 27-1/2 inch (699 mm)
Height: 38 inch (965 mm)
Length: 55-1/4 inch (1403 mm)

Choose Standard wedge disc plates or Magnetic

See Guide to Silica Dust Control

Weight 160 lbs
Gas or Electric

Gasoline Model, Electric Model
Wedge or Magnetic Disc Plate

Wedge (legacy) Plate, Magnetic Plate
  • Best Rates for commercial location WITHIN city limits; or a freight depot for will-call, a farm supply store, NAPA dealer, etc. You can change this later.
  • This field is for validation purposes and should be left unchanged.