Lower prices than even buying direct. If not we want to know.
Dig R Tach Hydraulic Hole Digger GEN M471-12

Dig R Tach Hydraulic Hole Digger GEN M471-12

$1,133.00

Flat Rate Shipping (for immediate purchases) : $ 175
Use Quick Quote in the tab below for precise shipping.
Designed for compact tractor loader backhoes, mini excavators and small tractor loaders. For use with the 4710 Series augers and 6700 Series Auger Extensions.

Specifications:
AUGER
– Drive shaft Connection: 2 inch (mm) Hexagon
– Diameter: 4″ (102mm) to 24″ (610mm)
– Extension: Flighted and Non-flighted plain tube,
– Depth to 45″ (1143mm)
– Maximum Drilling Torque: 281-425 ft. lbs.
– 50 lbs

Hydraulic System
– Configuration: Open Type
– System Flow: 5-10 GPM (19-38 lit/min) at 1500 -3000 PSI

Available on backorder

For a quotation use the QUICK QUOTE form in the tab below, or call us at 800-214-1649.
SKU: GEN-M471/553 Category:
Designed for compact tractor loader backhoes, mini excavators and small tractor loaders. For use with the 4710 Series augers and 6700 Series Auger Extensions.

Specifications:
AUGER
– Drive shaft Connection: 2 inch (mm) Hexagon
– Diameter: 4″ (102mm) to 24″ (610mm)
– Extension: Flighted and Non-flighted plain tube,
– Depth to 45″ (1143mm)
– Maximum Drilling Torque: 281-425 ft. lbs.
– 50 lbs

Hydraulic System
– Configuration: Open Type
– System Flow: 5-10 GPM (19-38 lit/min) at 1500 -3000 PSI

* Not to be utilized as an earth drilling attachment with skid steer loaders or any carrier vehicle not equipped with a proper protective barrier to prevent auger contact with the operator during normal operation. Not designed to be mounted to the dipperstick bucket of compact tractor loader backhoes because of inherent center of gravity limitations.

04/17/2014

04/24/15

Weight 175 lbs
Shipping

38
Augers and Drive Machine Types
  • Best Rates for commercial location WITHIN city limits; or a freight depot for will-call, a farm supply store, NAPA dealer, etc. You can change this later.
  • This field is for validation purposes and should be left unchanged.