Showing all 9 results

Augers for Skid Steers and Hole Digging Equipment

augerbits.jpgbackhoediggers.jpgtractor3point.jpgtractorloaders.jpgskidsteerdiggers.jpgonemandiggers.jpgtwomandiggers.jpgmiscdiggers.jpg

Equipmentland carries diggers from Ag Meier, Belltec, Danuser, General Equipment Co., and Tanaka. If you don’t see it here call Equipmentland at 1-800-214-1649 today.

 

Sale!
– Pit Boring Machine runs off skid steer, mini-ex or backhoe
– Telescoping side stabilizers, Simple operator controls.
– Boring speeds up to 5’ (1.524 m) per minute.
– Bores diameters up to 3 ½” and distances 50′ to 80’
– Bore Reams: 1 1/4” – 2 1/2”;  2” – 4 1/2”
– For Pits: 78″ long by 18″ to 24″ wide
$5,897.00 $5,690.00
 – M451010SS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″,  115 lbs.
$5,190.00
 – M451010MS 40′ Moling Kit Included
– Quick attach back plate / 3 boring positions / Center mounted
– Bores 1-1/4″ to 4-1/2″ (3.2 cm – 11.4 cm) dia. to 40-50′
– Motor: Hydraulic with forward/reverse
– Torque: 530 ft/lbs. @ 2500 psi, rpm @ 8 hpm
– 25″ W x 30″ L x 22″,  115 lbs.
$3,990.00

– For skid steers, loaders, backhoes and excavators
– For 15-30 GPM, not over 3,000 PSIxa0
– Bucket curl circuit recommended
– Hydraulic Drive with planetary gearbox, Shear Flange
– Light to heavy digging including solid rock or concrete
– Uses augers up to 36 in. diameter
– Up to 2,900 ft lb torque. 2″ hex output shaft
FREE SHIPPING to Continental USA & S. Canada when ordered with two accessories (i.e. mount, extensions, augers).

$2,468.48

– For skid steers, loaders, backhoes and excavators
– For 10-20 GPM, not over 3,000 PSI
– Bucket curl circuit recommended
– Hydraulic Drive with planetary gearbox, Shear Flange
– Light to heavy digging including solid rock or concrete
– Uses augers up to 30 in. diameter
– Up to 2,000 ft lb torque. 2″ hex output shaft
FREE SHIPPING to Continental USA & S. Canada when ordered with two accessories (i.e. mount, extensions, augers).

$2,269.76

– For skid steers, loaders, backhoes and excavators
– 20-35 GPM, not over 3,000 PSI
– Bucket curl circuit recommended
– Hydraulic Drive with planetary gearbox
– Light to heavy digging, some rock, medium duty rate
– Uses augers up to 36 in. diameter
– Up to 3,500 ft lb torque. 2″ hex output shaft
FREE SHIPPING to Continental USA & S. Canada when ordered with two accessories (i.e. mount, extensions, augers).

$2,062.76

– Medium flow-rate economy hydraulic drive
– For skid steers, farm tractors and mini-excavators.
– Planetary gearbox to eliminate chain and sprocket reductions
– Ideal for light to moderate drilling applications to 36″ dia.
– Maximum Output Torque: 2600 ft-lbs
– Recommended Fluid Flow: 15-30 gpm
– 2″ Hex Output
FREE SHIPPING to Continental USA & S. Canada when ordering with two accessories (mount, hoses, augers)

$1,607.36

– Economical lightweight hydraulic drive
– For skidsteers, tractors & mini excavators
– Maximum Output Torque: 1777 ft-lbs
– Recommended Fluid Flow: 10-20 gpm
– Maximum Pressure-Continuous: 3000 psi
– Suggested Max Auger Dia-Dirt” 30 in.
– Weight: 148 lbs.
FREE SHIPPING to Continental USA & S. Canada when ordering with two accessories.

$1,483.16

– Economical lightweight hydraulic drive
– For small skidsteers and light tractors
– Maximum Output Torque: 1419 ft-lbs
– Recommended Fluid Flow: 6-15 gpm
– Maximum Pressure-Continuous: 3000 psi
– Suggested Max Auger Dia-Dirt: 18 in
– Weight: 148 lbs
FREE SHIPPING to Continental USA & S. Canada when ordering with two accessories.

$1,441.76