Showing all 23 results

– Cantherm EC 100 Heater
– Air Flow: 880 CFM; Heat Rise 150 deg. F.
– .81 GPH; 11.9 Gallon Tank; 110 V
– Preheated fuel filter standard.
– Uses 12″ x 12′ Pin-Lock Duct, No adapter needed
10% OFF Order Two or More Units Coupon code EC10%Off

$1,599.00

– Heat Output: 219,000 BTU
– 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
– Pneumatic Tires, Fuel Gauge, Preheated fuel filter
– 11.4 amp Draw, 175 deg. F heat rise, Weight: 176 lbs
– Optional: thermostat, external tank, lift kit

$2,189.00

– Heat Output: 219,000 BTU
– 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
– Pneumatic Tires, Fuel Gauge, Preheated fuel filter
– 11.4 amp Draw, 175 deg. F heat rise, Weight: 176 lbs
– Includes Duct Adapter and TWO 12″x12′ Vinyl Ducts

$2,789.00

– Strap-Lock 16″ x 15′ for EC Heaters
– Temperature ranges:
-20 to 200 degrees F; -29 to 93 degrees C
– Standard Pitch: 6″ dia.- 3″ pitch; 8″, 11″- 4″ pitch

$240.00
PHOEN400 External Tank Kit

External fuel tank for Cantherm Phoen400 and Fire Heaters.

,

– Easy plug-in diverts supply from on–board tank
– By-passes Internal Tank

,

– Provides connections for external tank hoses
$263.00

EnviroDuct PVC Ducting 12″ x 12′
– Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
– PVC/ Polyester VentaTex®
– Steel-wire helix/ w/ heavy duty wear strips
– Free shipping when ordering with CAN-EC100

$160.00
Phoen Heater Splitter
– Splitter for Cantherm PHOEN heaters to accept two 16″ x 15′ diameter ducting with Belted Cuff connectors.
– PHOEN400 Two Way Duct Adapter – 16″
– Fits both Phoen 400 and 380 models.
$318.00
– 110,000 BTU/HR
– Indirect-Fired Fan: 120v, 4amp; CSA US Certified
– Air Flow: 880 CFM; Ductable up to 25′
– Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
– Fuel Tank: 12 US Gallons,xa0 Pre-Heated Fuel Filter
– Shipping Size: 38″L x 22″W x 25″H, 100 lbs.
– Could heat 20’x40′ tent, (30 deg. temp rise)
$2,225.00
Sale!

– BTU: 294,000   CFM: 2,530 120v/15amp
– Pneumatic Tires, Fuel Gauge, Preheated fuel filter
– Tank: 27.7 gal.  2.17 gl/hr; 13 hrs
– Optional: thermostat, external tank, lift kit
– Uses 12″ Duct

 

 

$2,729.00 $2,590.00

16″ x 15′ EnviroDuct PVC Ducting and Adapter Kit
for Cantherm EC Heaters

16″ x 15′ EnviroDuct PVC Ducting for Cantherm EC Heaters
– Temperature range:
-20 to 200 degrees F; -29 to 93 degrees C
– Standard Pitch: 6″ dia.- 3″ pitch; 8″, 11″- 4″ pitch.

$498.00
Phoen Heater Splitter
– Splitter for Cantherm PHOEN heaters to accept two 16″ x 15′ diameter ducting with Belted Cuff connectors.
– PHOEN400 Two Way Duct Adapter – 16″
– Fits both Phoen 400 and 380 models.
$318.00
– Cantherm PHOEN Heater Duct Adapter
– Attach one 20″ Duct to a Phoen400 Heater

,

– For Belted Collar 20″ Ducts
$195.00
Out of stock

CAN EC300 is a discontinued model. It is being replaced with the Heatwagon HVF310, see at https://equipmentland.com/product/300k-btu-indirect-fired-oil-heater-hvf310/

Sale!

– Similar to Cantherm Phoen 400 and Flagro FVO-400
– Indirect-Fired Fan: 120V, 20 Amp
– 400,000 BTU/HR; 3,250 CFM; Ductable up to 60′
– Temperature Rise: 140 deg. F
– 2 Settings: Low 272K BTU, High 412K BTU
– Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
– 57 gallon tank, 30 hr run time; Preheated Fuel Filter
– 69″L x 27″W x 38″H; 507 lbs.

$7,750.00 $6,690.00
Sale!

Heat Output: 300,000 BTU/HR
– Indirect-Fired Fan: 120v, 12amp; CSA US Certified
– PRE-HEATED FUEL FILTER
– Air Flow: 2,500 CFM; Ductable up to 50′
– Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
– Fuel Tank: 26 gallon tank, Preheated Fuel Filter
– Shipping Size: C69″L x 27″W x 38″H; 270 lbs.
– Could heat 40’x80′ tent, (30 deg. temp rise)
– Weight 270 lbs.

$4,490.00 $4,270.00

– Heat Output:205,000 BTU/HR
– Indirect-Fired Fan: 120v, 9amp; CSA US Certified
– PRE-HEATED FUEL FILTER
– Air Flow: 1,530 CFM; Ductable up to 50′
– Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
– Fuel Tank: 14 US Gallons, Preheated Fuel Filter
– Shipping Size: 57″L x 24″W x 32″H, 180 lb

$3,250.00
Sale!

Stock subject to change without notice.
Please inquire before ordering.
– 200,000 BTU; 1/2 HP@1725 RPM; 1500 CFM
– Built in fuel tan
– Heat Exchanger: 16 Gauge 304 stainless steel
– Direct Spark ignition
– Gas Pressure: 1.25 x 60B @ 145 PSI
– Air outlet: one, 12″ Diameter
– 120 Volt, 15 Amp; – Dimensions: 51.5″ L x 27″ W x 43.5″  330 lbs.

$3,865.00 $3,590.00
Sale!

– Two Flagro FVO-400 Indirect-Fired Heaters 790M BTU
– Air Flow: 6000 CFM from 1.5HP Fan Motor @ 3450 RPM
– DOT  Dual axle trailer w/brakes; 16’L; 7′-4″W; 6’H;  4000 lbs empty
– 14mHp 120V Stamford Newage Genset 8KW@1800rpm
– Tank Capacity: 299 US Gallons; 51 Hour Operating Time
– Built in Duct Storage- Instrument panel, keyed ignition and hour meter

$37,935.00 $34,500.00
Sale!

Out of Stock – Subject to change without notice.
Please inquire before ordering. Thank you.

– Heat Exchanger for external exhaust
– Thermostatically controlled
– Direct spark ignition
– 2500 CFM; 390,000 BTU/hr; 450 lbs
– Built-in fuel tank for oil, diesel, or kerosene.

$5,419.00 $4,990.00
– PHOEN380 Three Way Duct Adapter – 12″
– Splitter for Phoen400 heater to accept three 12″ x 15′ ducts.
$373.00

– Standard Duct for the EC Series heaters
– Also works with Jumbo Models
– Metal Pin-Lock collars
– Can be hooked in tandem per static pressure capacity of heater
– Extra-durable cotton canvas ducting.
– For high abrasive applications
– 20 lbs. ea.

$163.00
Re-Circulating 20″ Duct Adapter Kit for Phoen400 Heater Model PHOEN400RDA
– Now you can recycle nearly 100% of heated air.
– Duct Adapter mounts inline with a return air to heater
– Increases efficiency of heater, reheats air, more heat “rise”
– Photo shows installation on end of heater
12/29/12xa0
$340.00
Plugs into heater, regulates on/off feature
– Adjustable
– 30 Quality cord
$150.00