Showing all 24 results

– Accessories for Flagro indirect fired heaters
– 12″ x 25 Hitex Ducting for Flagro indirect heaters
– Pin Lock Connectors

$290.00
-24 inch nominal diameter, 6 mil thickness, clear polyethylene material.
-Can be attached to the EP17 and the GP21 Positive Pressure Ventilators for pressure type ventilation applications.
-Bend radius when inflated can be restricted.
-Disposable by acceptable methods or can be reused.
$0.65

– Strap-Lock 16″ x 15′ for EC Heaters
– Temperature ranges:
-20 to 200 degrees F; -29 to 93 degrees C
– Standard Pitch: 6″ dia.- 3″ pitch; 8″, 11″- 4″ pitch

$240.00

EnviroDuct PVC Ducting 12″ x 12′
– Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
– PVC/ Polyester VentaTex®
– Steel-wire helix/ w/ heavy duty wear strips
– Free shipping when ordering with CAN-EC100

$160.00
ACCESSORIES for HVF110
– Heatwagon 12″ x 25′ Ducting
-12 Inch x 25 Foot Ducting
$359.00
ACCESSORIES for HVF110
– Duct Ring
$110.00
ACCESSORIES for HVF110
– Diffuser for ducting
$250.00
HWAG-WD1825
PHP Heat Wagon Heaters
Heatwagon 25′ Ducting for HVF300A
$348.00

16″ x 15′ EnviroDuct PVC Ducting and Adapter Kit
for Cantherm EC Heaters

16″ x 15′ EnviroDuct PVC Ducting for Cantherm EC Heaters
– Temperature range:
-20 to 200 degrees F; -29 to 93 degrees C
– Standard Pitch: 6″ dia.- 3″ pitch; 8″, 11″- 4″ pitch.

$498.00
– 8 in. diameter x 25 ft. length.
– Wire helix reinforced with anti-scuff strip.
– Complete with aluminum attachment cuff and static ground leads.
– For use with the Model EP8HL Blower only.
$751.00
– 8 in. diameter x 15 ft. length.
– Wire helix reinforced with anti-scuff strip.
– Complete with aluminum attachment cuff and static ground leads.
– For use with the Model EP8HL Blower only.
$475.00
– Cantherm PHOEN Heater Duct Adapter
– Attach one 20″ Duct to a Phoen400 Heater

,

– For Belted Collar 20″ Ducts
$195.00
ACCESSORIES for HVF110
-12″ x 20′ Duct
$300.00
ACCESSORIES for HVF210
– Heatwagon Duct Ring
$110.00

REQUIRED EQUIPMENT FOR HEATER INSTALLATION
*Ventless regulatoravailable on request

Model #
Second Stage Regulator* Typical Hose Assembly
F-1500T B32R1.25 (1-1/4″ NPT) S54180-20 1xbcu201c x 15ft Hose Assembly
Sale!

– Accessories for Indirect-Fired Heaters
– 16″ x 25 Hitex Ducting for Flagro indirect heaters
– Non-insulated, Durable

$410.00 $390.00

– REQUIRED EQUIPMENT FOR HEATER INSTALLATION
– Ventless regulator available on request
– Note: *Regulator sizing assumes job site inlet pressure of 2-10 PSI.
– Custom hose assemblies are available upon request

$139.00
EnviroDuct PVC Ducting
PVC/ Polyester VentaTexxae 13oz/sq yd Fabric
– Steel-wire helix/ with heavy duty wear strips
– Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
– Check heater listing for applicable size ducts
$180.00
– PHOEN380 Three Way Duct Adapter – 12″
– Splitter for Phoen400 heater to accept three 12″ x 15′ ducts.
$373.00

– Standard Duct for the EC Series heaters
– Also works with Jumbo Models
– Metal Pin-Lock collars
– Can be hooked in tandem per static pressure capacity of heater
– Extra-durable cotton canvas ducting.
– For high abrasive applications
– 20 lbs. ea.

$163.00
Re-Circulating 20″ Duct Adapter Kit for Phoen400 Heater Model PHOEN400RDA
– Now you can recycle nearly 100% of heated air.
– Duct Adapter mounts inline with a return air to heater
– Increases efficiency of heater, reheats air, more heat “rise”
– Photo shows installation on end of heater
12/29/12xa0
$340.00
– HWAG-23189
– Heatwagon Diffuser
– 15lbs
$442.00
HWAG-AR310
Heatwagon Duct Ring for HVF310A
$248.00