Subtotal: $3,820.00
Equipmentland is the prevailing dealer of Cantherm and Arcotherm heaters for North America, including the US mainland, Canada, Alaska, or export. Cantherm (AKA Arcotherm) heaters are made in Italy and distributed in North America. A full line of accessories are available, quick delivery and excellent technical and customer service. From the smallest direct-fired unit to Jumbo units of 900K BTU, Cantherm indirect-fired heaters are very popular. High CFM airflow, reliable burners and circuitry make these units very popular. Equipmentland is a leading seller and advisor of heaters to meet your need. Contact your Equipmentland sales rep today for the best quote you can get, even less than buying direct.
[slick-slider design=”design-4″ slick-slider category=”640″ sliderheight=”700″ ]
Cantherm
– Heat Output: 800K BTU, 7,420 CFM
– OIL Fueled (Diesel, Kerosene, Fuel Oil)
– Standard w/ pneumatic tires, pre heated oil filter
– Two-stage Startup means no cold air delivered
– 21 AMP Draw at Startup; 25 AMP Recommended
– Burner not attached. Some assembly required.
Sale!
SUPER SPECIAL Four units left
INCLUDES SPLITTER AND DUCTS!
Two with a 3-way 16” splitter and two 16” ducts
Two with a 2-way 24” splitter and two 24” ducts
– Heat Output: 700K BTU, 7,420 CFM
– GAS Fueled (Natural Gas, Propane)
– Gas consumption: 700 Cubic Feet per Hour.
– Two-stage Startup means no cold air delivered
– 21 AMP Draw at Startup; 25 AMP Recommended
Sale!
– Heat Output: 600K BTU, 7,063 CFM
– Order in Oil powered OR NatGas/Propane
– Standard w/ pneumatic tires, pre-heated oil filter
– Two-stage Startup means no cold air delivered
– Burner not attached. Some assembly required.
– Heat Output: 700K BTU, 7,420 CFM
– OIL Fueled (Diesel, Kerosene, Fuel Oil)
– Standard w/ pneumatic tires, pre heated oil filter
– Two-stage Startup means no cold air delivered
– 21 AMP Draw at Startup; 25 AMP Recommended
– Burner not attached. Some assembly required.
Sale!
SPECIAL OVERSTOCK DEAL
BUY TWO AND GET AN ADDITIONAL $100 PER UNIT.
– Nat Gas or Propane Model of the most popular indirect fired heater.
– 380K BTU, Air Flow: 3,250 CFM; Heat Rise 165 deg. F.
– 110V, 60 Hz, Pneumatic Tires, High/low heat output. Two Fans
– Shown with HDKIT Lift Kit Included
– 110V, 60 Hz, Pneumatic Tires, High/low heat output. Two Fans
– Shown with HDKIT Lift Kit Included
– Heat Output: 219,000 BTU
– 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
– Pneumatic Tires, Fuel Gauge, Preheated fuel filter
– 11.4 amp Draw, 175 deg. F heat rise, Weight: 176 lbs
– Includes Duct Adapter and TWO 12″x12′ Vinyl Ducts
Sale!
– Heat Output: 219,000 BTU
– 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
– Pneumatic Tires, Fuel Gauge, Preheated fuel filter
– 11.4 amp Draw, 175 deg. F heat rise, Weight: 176 lbs
– Optional: thermostat, external tank, lift kit
– Oil Fired Radiant Heater: Kerosene, Diesel, fuel oil
– Low noise level, Odor free
– Single point bail lift
– Heavy duty construction, Shock proof fuel tank
– Adjustable floor-heat shield, easy access fuel filter
– Fuel tank: 17 gallons,Run time: 16 hours
Sale!
– Cantherm EC 100 Heater including Adapter and 25′ Duct
– Air Flow: 880 CFM; Heat Rise 150 deg. F.
– .81 GPH; 11.9 Gallon Tank; 110 V
– Preheated fuel filter standard.
– 11″ x 25″ Duct Included with Adapter
Sale!
– Cantherm EC 100 Heater
– Air Flow: 880 CFM; Heat Rise 150 deg. F.
– .81 GPH; 11.9 Gallon Tank; 110 V
– Preheated fuel filter standard.
– Uses 12″ x 12′ Pin-Lock Duct, No adapter needed
10% OFF Order Two or More Units Coupon code EC10%Off
– HD Frame Kit for Cantherm Phoen 380/400 Indirect Fired Heater.
– Heavy frame with lift ring
– 360 degree protection and pallet fork pockets.
On-Board Fuel Tank for Jumbo 700
– Made-to-order option
– Tank sits below unit with wheels mounted to the tank.
– Allow two days for assembly.
– Dimensions: 28x56x12
– Weight: 80 lbs.
– Made-to-order option
– Tank sits below unit with wheels mounted to the tank.
– Allow two days for assembly.
– Dimensions: 28x56x12
– Weight: 80 lbs.
On-Board Fuel Tank for Jumbo 900
– Made-to-order option
– Tank sits below the unit with wheels mounted to the tank.
– Allow two days for assembly.
– 37 US Gallons
– Dimensions: 28x56x12
– Weight: 80 lbs.
– Made-to-order option
– Tank sits below the unit with wheels mounted to the tank.
– Allow two days for assembly.
– 37 US Gallons
– Dimensions: 28x56x12
– Weight: 80 lbs.
16″ x 15′ EnviroDuct PVC Ducting and Adapter Kit
for Cantherm EC Heaters
16″ x 15′ EnviroDuct PVC Ducting for Cantherm EC Heaters
– Temperature range:
-20 to 200 degrees F; -29 to 93 degrees C
– Standard Pitch: 6″ dia.- 3″ pitch; 8″, 11″- 4″ pitch.
– PHOEN380 Three Way Duct Adapter – 12″
– Splitter for Phoen400 heater to accept three 12″ x 15′ ducts.
– Splitter for Phoen400 heater to accept three 12″ x 15′ ducts.
Re-Circulating 20″ Duct Adapter Kit for Phoen400 Heater Model PHOEN400RDA
– Now you can recycle nearly 100% of heated air.
– Duct Adapter mounts inline with a return air to heater
– Increases efficiency of heater, reheats air, more heat “rise”
– Photo shows installation on end of heater
12/29/12xa0
– Now you can recycle nearly 100% of heated air.
– Duct Adapter mounts inline with a return air to heater
– Increases efficiency of heater, reheats air, more heat “rise”
– Photo shows installation on end of heater
12/29/12xa0
– For top of Jumbo 700 Heater
– 20″ 2 way Duct Adapter
– Order with Jumbo 700 Heater and it will come installed
– Weight 12 lbs.
– 20″ 2 way Duct Adapter
– Order with Jumbo 700 Heater and it will come installed
– Weight 12 lbs.
Cantherm
Phoen Heater Splitter
– Splitter for Cantherm PHOEN heaters to accept two 16″ x 15′ diameter ducting with Belted Cuff connectors.
– PHOEN400 Two Way Duct Adapter – 16″
– Fits both Phoen 400 and 380 models.
– Splitter for Cantherm PHOEN heaters to accept two 16″ x 15′ diameter ducting with Belted Cuff connectors.
– PHOEN400 Two Way Duct Adapter – 16″
– Fits both Phoen 400 and 380 models.
Cantherm
Phoen Heater Splitter
– Splitter for Cantherm PHOEN heaters to accept two 16″ x 15′ diameter ducting with Belted Cuff connectors.
– PHOEN400 Two Way Duct Adapter – 16″
– Fits both Phoen 400 and 380 models.
– Splitter for Cantherm PHOEN heaters to accept two 16″ x 15′ diameter ducting with Belted Cuff connectors.
– PHOEN400 Two Way Duct Adapter – 16″
– Fits both Phoen 400 and 380 models.
Cantherm
– Converts 12″ to two 12″ ducts
– Uses Canvas or PVC Ducting
– Fabricated Sheet Metal, painted or powder coated.
– With Metal J-Lock collars unless specified otherwise
– Uses Canvas or PVC Ducting
– Fabricated Sheet Metal, painted or powder coated.
– With Metal J-Lock collars unless specified otherwise