Showing 61–80 of 83 results

Product Listings

EnviroDuct PVC Ducting 12″ x 12′
– Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
– PVC/ Polyester VentaTex®
– Steel-wire helix/ w/ heavy duty wear strips
– Free shipping when ordering with CAN-EC100

$160.00
Plugs into heater, regulates on/off feature
– Adjustable
– 30 Quality cord
$150.00

– REQUIRED EQUIPMENT FOR HEATER INSTALLATION
– Ventless regulator available on request
– Note: *Regulator sizing assumes job site inlet pressure of 2-10 PSI.
– Custom hose assemblies are available upon request

$139.00
ACCESSORIES for HVF210
– Heatwagon Duct Ring
$110.00
ACCESSORIES for HVF110
– Duct Ring
$110.00
  • AF500-0010  primary Filter
  • AF500-0020 HEPA Filter
  • AF500-0030 Odor Filter
$19.95$99.00

Wheel Kit – FLAG-WK400
Accessories for Flagro heaters

$77.00
-24 inch nominal diameter, 6 mil thickness, clear polyethylene material.
-Can be attached to the EP17 and the GP21 Positive Pressure Ventilators for pressure type ventilation applications.
-Bend radius when inflated can be restricted.
-Disposable by acceptable methods or can be reused.
$0.65
– 500K BTU; 81% efficiency; 500 CFM
– 1.5HP Electric Fan Motor; 115V / 25 AMP
– Generator: Kohler KD 420 9.5HP/ Gillette EDTD 60E 6,000W
–  Fuel Oil/Diesel Fuel 35 gal: 4.375 Gal./ hr.

TD750 has been replaced with TD1000.

Note all units over 600K BTU now require DEF.
See TDF625 for non-def alternative

– Skid Mounted or Towable
– Power Plant: Industrial Ford V6 or V10
– 600K to 1.0M BTU, 90% efficient
– 7,000+/- CFM; 3.5 in. static pressure
– Temperature: 180 deg. F;  3 ,200 lbs

– Custom Designed Models by Equipmentland
– <10,000 lbs. for helicopter use
– Up to 2 Million BTU per container
– Fuel Tank on board and/or Connections for remote tank
– Electrical Options: 110V/20A

TD1200 has been replaced with TD1000.
(DEF now required on units > 600K BTU.)
See all Therm Dynamics units here.

 

Replaces TD1200 
– John Deere 4045  Tier IV (DEF) Diesel 134 HP.
– 1 Mil. BTU/hr; 6,200 CFM/3.50″ lbs.
– (2) 100 Gal. Tanks, Double Containment
– 7.6 GPH Diesel, can modulate
– (2) 12″ Duct Outlets, Duct storage

– Cat C2.2 T4F diesel Tier IV Final (No DEF)
– 425+K BTU/hr; 3200 CFM; 180º F
– 3.1 GPH, Capacity: 85 Gals
-2,525 lbs  12’4″ L x 5’6”Hx6’0”L
– Trailered or Skid Mount
Out of stock

CAN EC300 is a discontinued model. It is being replaced with the Heatwagon HVF310, see at https://equipmentland.com/product/300k-btu-indirect-fired-oil-heater-hvf310/

– CAT  C3.4 T4F or KOHLER diesel
– Tier IV Final (No DEF) 4.9 GPH
– 600K BTU/hr  4,500 CFM 180 deg. F/ 3.5″ lbs
100 gal. std, 200 gal or 150 gal. 2x contained
– Heatwagon PHP Heater Accessories
– Remote Thermostat

REQUIRED EQUIPMENT FOR HEATER INSTALLATION
*Ventless regulatoravailable on request

Model #
Second Stage Regulator* Typical Hose Assembly
F-1500T B32R1.25 (1-1/4″ NPT) S54180-20 1xbcu201c x 15ft Hose Assembly